Are You New To Straw Bale Construction?
Workshop participants learning straw bale construction techniques. (cobbing the bales is so much fun!)
Great! It’s very easy to get started! We have all the resources you need to get familiar with straw bale construction and can guide you every step of the way.
We recommend you begin with the steps below:
Step 1 – Sign up for our 16-day Free Straw Bale E-Course
Step 2– Read the FAQs below
Step 3- Get inspired by visiting our Straw Bale Photo Gallery
Step 4 – Visit our Shop to explore the On-Demand Learning Courses that we offer (free and paid)
Step 5- Check out our list of current Workshops
Step 6- Drop us a note and Say “Hello!” We read every comment/idea/dream/suggestion that we receive from this incredible bale community… which now includes you! 🙂
In support,
Timbo & Dainella
Caretakers of the Strawbale.com Community
Is a straw bale house more energy efficient?
In general, yes. A straw bale wall is roughly three times as efficient as conventional framing. Over the life of a typical thirty-year mortgage, this superior insulation can reduce energy costs by up to 75%, saving money and vital natural resources.
As with any building, details and the quality of craftsmanship matters and heavily influences the energy efficiency of the structures’ performance.
Isn’t a straw bale home at greater risk for fire?
No. Canadian and U.S. materials laboratories have found that: “The straw bale/mortar structure wall has proven to be exceptionally resistant to fire.”
In these tests, the flames took more than two hours to penetrate the plastered bale walls. Conventional framing built to commercial standards took only 30 minutes to one hour to burn.
Due to their tight compaction, bales contain very little oxygen and thus resist combustion. It’s like trying to burn a phone book.
Loose straw, however, is a fire risk and during construction loose straw should be cleaned from the job site daily. Straw bale walls should be plastered as quickly as possible in the construction process to provide their tested fire resistance performance levels.
Are straw bale homes vulnerable to pests?
Pests are more of an imagined concern than a real threat. Once the walls are properly plastered or sided, there is no way for bugs or rodents to get into the bales other than to gnaw through 1 1/2”s of plaster.
If pests were to get inside the straw bale walls, they would find it almost impossible to move in the densely packed bales.
Termites and other pests pose more of a problem to conventional construction than they do to straw bale structures.
Again, as with any type of home construction, craftsmanship and attention to detail matter for long-term performance!
Do the thick straw bale walls provide good sound insulation?
Straw bale homes provide superior sound absorption compared with conventional houses. We hear this feedback all the time from owner-builders and straw bale home owners.
This can be especially important in the townhomes. The sound absorption between units will help create separation between common wall homes.
The ‘feel’ of a bale home is what you hear most about. Once inside, a deep breath is often inspired, a sense of peace and calm are common experiences. (Want to find a bale home to stay in? Check out our Find a Straw Bale Stay Near Me article for ideas.)
How do straw bale walls carry vertical and lateral loads?
In load-bearing straw bale structures, the bales themselves carry the vertical loads. High-density bales and proper compression are a must to ensure the bales will not settle under the weight of the roof assembly.
In-fill wall system structures rely on the framing to carry the vertical loads. Lateral loads, or shear strength, are carried by the wall assembly as a whole.
The bales, the structural wire mesh, and the plaster all play a part in the handling of lateral loads. Recent engineering has shown bale wall assemblies to be structurally sound even in the most volatile earthquake zones of California.
How do I find good quality bales for straw bale construction?
There are a number of things to keep in mind when shopping for bales. Know the size you are designing to (two string, three string, etc…).
The straw should be golden in color. Darker straw is often an indication of water damage. Check the density of the bales. The bale should not deform dramatically when lifted by one string. Use a handheld moisture meter to check moisture content. Bales have to be below 20% MC for construction. Finally, check for uniform shape. If the bales are all shaped properly, the baling machine was most likely set well, producing consistent bales. Read all the details of these points in our Choosing Straw Bales For Construction and Find Suppliers here.
Are there special tools for straw bale building?
Yes. Baling needles and tensioning forks are specialty tools essential to straw bale construction. (see these tools here.) The remaining tools are those commonly used on any home build site.
How can I learn the ins and outs of building with bales?
The best way to learn the art of straw bale construction is by taking a hands-on workshop. We offer 7-day hands-on workshops in several locations each year. These events are not only highly instructional, they are also extremely fun and often a life changing experience for those in attendance. You can find the list of current workshops here. We cover all aspects of straw bale construction, from foundation tips to plastering and everything in between.
If you cannot take time off work and attend, consider purchasing one of our instructional on-demand courses, or joining us at one of our virtually held Workshops (announced periodically and held when our hands-on workshop travel schedule allows!)
Finally, stay informed. The field of Straw Bale construction changes rapidly. To stay up to date make sure you are subscribed to our free community Straw eNews — we always share the best with our community first!
Do I have to design the house differently when using straw bales?
Yes! It is a good idea to know the size of the bales you intend to use before you start designing. That way, you can keep the modular unit of the bale in mind when laying out the plan.
Bales take up more floor space than conventional walls, so use them to your advantage. Use window seats, wall cutouts, and flush mount cabinetry to increase the usable space within the walls themselves.
Check our free articles on designing with straw bales. And, have a look at our straw bale house stock plans to get a better idea of some of the differences.
If you are interested in learning more, we offer a Straw Bale Home Design workshop — email us at info@strawbale.com to get on the waitlist.
How do I teach Subcontractors what to do for straw bale construction?
This takes experience. You might want to build a small structure yourself, start to finish, like the one shown in our straw bale Starter Project Package. The techniques described in the videos will help you fully understand the subcontractor's needs.
Scheduling is a little different from conventional homes because including bales affects the installation of rough wiring and plumbing.
You can use our consultation services to help bridge any gaps in the sub’s installation experience specific to bales. Or, we can teach you the ins and outs to speak with subcontractors to help them bridge the gap. This is a common topic at workshops.
Should I be concerned about the straw getting wet?
Moisture concerns can be handled with proper design and construction methods. So long as the bales are installed when dry (moisture content of 14% or less) and are properly sealed within the plaster and protected from water infiltration, they will perform well.
The adopted International Residential Code, Straw Bale Structures Appendix, has standards in place to accommodate this design and type of construction.
Even if a building is heavily rained on, it will be fine as long as it is allowed to dry out. Problems arise when high moisture levels above 20%) are sustained for long periods of time.
Won’t the straw decompose?
Organic material requires both oxygen and water to decompose. With proper construction techniques, water will not enter the building, thus making decomposition impossible.
Rice straw, in particular, has a high silica content, which increases its resistance to decay. Straw has been used as an insulating material for many centuries and has even been found in excellent condition in Egyptian tombs thousands of years old. Straw will not decompose as long as its moisture content is kept low.
What does it mean that straw bale walls “breathe”?
Bale walls do not breathe in the sense of allowing air to move through the walls. In fact, it is a good idea to limit air infiltration into the walls as air carries moisture.
When we say they breathe, we are referring to the movement of moisture through and out of the walls. It is critical that moisture moves out of the walls.
Permeable plasters such as lime or earth should be used in wet or humid climates, and Cement-based plasters should only be used in dry climates, if at all.
This moisture transfer improves indoor air quality without sacrificing energy efficiency and keeps the bales dry. Straw is a natural material, and as such, it does not off-gas the way conventional insulations do, adding to the health of the home and its occupants.
Do bales restrict my home design options?
The thick, pliable bales actually improve design options. Creative nooks and window seats are standard in straw bale construction. Built-in furniture, curved walls, landscape features, and sound barriers are all easily accomplished with bales.
How are the walls finished?
Bale walls can be finished in many ways. The typical options include lime plaster, stucco, and earth plaster. Each of these materials has its pros and cons, although some have more cons than pros.
When choosing a finish material, consideration must be given to durability, maintenance requirements, permeability, flexibility, strength, ease of application, cost, embodied energy, and aesthetics. The finish’s breathability, embodied energy, and durability are the most important factors.
How durable is a home made out of straw?
Bale homes were built in the 1800s and still exist in Nebraska and Europe. Straw bale homes have consistently withstood severe weather and wind in Wyoming and major earthquakes in California.
Many architects and engineers consider straw bales to be the ideal “seismic-resistant” building material. In wind tests, bale structures see no movement in a sustained 75 mph gale and only 1/16 inch movement with 100 mph gusts.
How does building with straw bales help our environment?
The use of straw bales can have a huge impact on our natural resources and air pollution. Each year, the U.S. alone burns or disposes of 200 million tons of ‘waste straw,’ producing massive amounts of carbon dioxide.
Using straw as insulation reduces the need for initial energy outputs in manufacturing. There is less embodied energy in straw as it is available in almost every local market, reducing transportation costs and efforts. Straw is a renewable resource that has a one-year growth/harvest cycle.
Using this local, agricultural by-product as a building material, we reduce energy expenditures, the amount of straw burned, and the use of fossil fuels needed for material transportation.
How do I hang things on the wall?
When a quality plaster is used, most items can be hung directly on the plaster with conventional plaster screws and plugs. This is true for pictures, coat hangers, and other small items.
To hang larger items such as kitchen cabinets, backer boards must be installed into the bales before the plaster is applied. In the case of extremely heavy loads, a bolt can be threaded through the bales and fastened to an oversized washer on the opposite side of the wall.
Can plumbing be run through bale walls?
In a perfect world, plumbing would be kept out of the bales entirely. Whenever possible, design a structure so that the plumbing can be run through the floor and interior stick frame walls. Check with your plumber about “wet venting” plumbing fixtures so the vents can run through the floor to the interior walls.
When it is not possible to keep plumbing out of the bales, you can either build a faux wall in front of the bales in which to run the plumbing, or you can place the plumbing in a continuous sleeve that will contain any leaks or sweaty pipes.
What about electrical systems?
Although Romex is allowed by many codes for straw bale construction, most building inspectors want to see direct burial cable (UF-B) in the walls when a sheathed wiring is employed. It is important to hold the wires back from the face of the bales so they are not damaged during the construction or post-construction process.
If wire upgrades are possible in the future, or if additional circuits may someday be added, it is a good idea to use chases. If, at a later date, you decide to upgrade the system, you can simply pull new wires through the conduit or fish wires into the chase to the desired location.
To reduce the effects of electrical magnetic fields (EMFs) use metal cased, twisted wire. The twist in the wire along with the metal conduit reduces the emission ofEMFs.
